Extrusion & Post
11 visualizaciones
Gel Particles on EVOH Extruded Film
Fenómeno del problema
EVOH extruded film surface shows 0.1-0.5mm transparent gel particles
Análisis de la causa
High molecular weight components in EVOH not fully melted during extrusion forming local highly crystalline regions; extrusion temperature too low or mixing insufficient
Solución
1) Increase extrusion temperature by 5-10°C to ensure full melting; 2) Increase screw mixing section length; 3) Inspect raw material to ensure consistent grade; 4) Replace with finer 120 mesh screen to intercept unmelted particles
Conclusión clave
Gel particles are caused by insufficient melting; increasing temperature and mixing is key
¿Le ha resultado útil?
0 personas encontraron esto útil
¡Gracias por sus comentarios!